- Standard measuring chamber
Standard measuring chamber for dew point measurement for compressed air up to 16 bar
- High-pressure measuring chamber
High-pressure measuring chamber for compressed air up to 350 bar
- Measuring chamber for granulate dryers and gases
- Applicable for -1…16 bar
- Process connection: Plug connection for 6 mm hose at inlet and outlet or G 1/4″ female thread when using without plug connections
- Sensor connection: G 1/2″ female thread
- The flow of at least 2 liters / min of air / gas must be ensured by the customer
- Measuring chamber for atmospheric dew point
Applicable for 2…16 bar
- Process connection: Plug nipple NW 7.2 (Parker series 26) or G 1/4″ female
- thread when using without plug nipple
- Sensor connection: G 1/2″ female thread
- Gives 2-3 liters / min of process air to the environment
- The throttle valve in front of the measuring chamber relaxes the compressed air to atmospheric pressure in the measuring chamber. The manometer integrated in the measuring chamber indicates the overpressure to the atmosphere
- Control and calibration set for dew point sensors
Control and calibration sets ensure a specific humidity level using a saturated saline solution.
Easily screwed onto the dew point sensor, these sets provide a convenient and cost-effective method for on-site control and calibration, reaching down to a -20°C dew point.
The available sets include:
- Control and calibration set at 11.3% RH
- Control and calibration set at 33% RH
- Control and calibration set at 75.3% RH
- Measuring chamber stainless steel 1.4305, for dew point measurement
Measuring chamber stainless steel for dew point measurement in gases/air up to 350 bar (stainless steel: 1.4305)
